Home - News - Details

Several Factors Affecting The Cycle Performance Of Lithium Batteries

1. moisture

Too much water will have side reactions with the positive and negative active substances, destroy their structures, and then affect the circulation. At the same time, too much water is not conducive to the formation of SEI film. However, while trace water is difficult to remove, trace water can also ensure the performance of the cell to a certain extent. Unfortunately, the civil and military have almost no personal experience in this area, so they can't say much. If you are interested, you can search the information about this topic in the forum. There are still many.

2. material type

The choice of materials is the first factor affecting the performance of lithium ion batteries. If the material with poor cycle performance is selected, the cycle of the cell will not be guaranteed no matter how reasonable the process is and how perfect it is made; If better materials are selected, even if there are some problems in the subsequent manufacture, the cycle performance may not be too poor (for the lithium cobalt oxide cell with a primary capacity of only about 135.5mah/g and lithium evolution, 1c has dived for more than 100 times, but more than 90% of 0.5c and 500 times; for the cell with black graphite particles on the negative pole after the primary cell is disassembled, the cycle performance is normal). From the point of view of materials, the cycle performance of a full battery is determined by the worse one of the cycle performance after the positive pole is matched with the electrolyte and the cycle performance after the negative pole is matched with the electrolyte. The cycling performance of the material is poor. On the one hand, the crystal structure changes too fast during the cycling process, so that the lithium insertion and lithium removal can not be completed. On the other hand, it may be that the active substance and the corresponding electrolyte can not form a dense and uniform SEI film, resulting in too early side reactions between the active substance and the electrolyte, so that the electrolyte is consumed too quickly, thus affecting the cycling. In the design of the cell, if one pole confirms to select the material with poor cycle performance, the other pole does not need to select the material with good cycle performance, which is a waste.

3. positive and negative electrode compaction

High compaction of the positive and negative electrodes can improve the energy density of the cell, but it will also reduce the cycling performance of the material to a certain extent. Theoretically, the greater the compaction, the greater the damage to the structure of the material, and the structure of the material is the basis to ensure that the lithium-ion battery can be recycled; In addition, the cell with high positive and negative electrode compaction is difficult to ensure high liquid retention, which is the basis for the cell to complete normal cycle or more cycles.

4. coating film density

It is almost an impossible task to consider the effect of membrane density on circulation in a single variable. The difference in film density either leads to the difference in capacity, or the difference in the number of core winding or lamination layers. For cells of the same model, capacity and material, reducing the film density is equivalent to increasing the number of winding or laminating layers of one or more layers. The increased diaphragm can absorb more electrolyte to ensure circulation. Considering that thinner film density can increase the magnification performance of the cell, and it will be easier to bake and remove water from the pole piece and the bare cell, of course, the error of coating with too thin film density may be more difficult to control, and the large particles in the active material may also have a negative impact on coating and rolling. More layers mean more foils and diaphragms, which means higher cost and lower energy density. Therefore, the evaluation also needs to be balanced.

5. excessive negative electrode

In addition to the influence of the first irreversible capacity and the density deviation of the coating film, the influence on the cycle performance is also a consideration. For the lithium cobalt oxide plus graphite system, it is common for the negative graphite to become the "short board" in the circulation process. If the negative electrode is excessive and insufficient, the cell may not release lithium before cycling, but the positive electrode structure changes little after hundreds of cycles, but the negative electrode structure is seriously damaged and cannot fully receive the lithium ion provided by the positive electrode, resulting in lithium release, resulting in premature decline in capacity.

6. electrolyte quantity

There are three main reasons for the influence of insufficient electrolyte on the circulation: the first is insufficient liquid injection; the second is insufficient immersion caused by insufficient aging time despite sufficient liquid injection or excessive compaction of the positive and negative electrodes; and the third is that the electrolyte inside the circulating cell is consumed. Insufficient liquid injection and liquid holding capacity Wenwu wrote the influence of electrolyte loss on cell performance before, so it will not be repeated. For the third point, the microscopic performance of the matching between the positive and negative electrodes, especially the negative electrode, and the electrolyte is the formation of dense and stable SEI, while the performance visible in the right eye is the consumption rate of electrolyte during the cycle. On the one hand, the incomplete SEI film can not effectively prevent the negative electrode from side reaction with the electrolyte, thus consuming the electrolyte. On the other hand, the defective part of the SEI film will regenerate the SEI film as the cycle proceeds, thus consuming the reversible lithium source and electrolyte. Whether for cells that have been cycled for hundreds or even thousands of times or for cells that have been diving for dozens of times, if the electrolyte is sufficient before the cycle and the electrolyte has been consumed after the cycle, increasing the electrolyte retention is likely to improve its cycle performance to a certain extent.

Send Inquiry

You Might Also Like